Leak Detection |
Leak detection is an important part of water conservation and economics as well. A faucet dripping once a second can leak thousands of gallons per year! In addition, leaking water costs the District money to treat and distribute, and costs the customer money as a result of larger water bills. If you suspect that you may have a water leak, the first step is to contact our main office. We can assist you with reviewing your water bill history to determine if usage is unusually high compared to your historical readings. If it does appear high, we will set up an appointment to check your water meter for movement. You will need to be home at this time and make sure that all water-consuming appliances and fixtures are off. One of our technicians will check your meter for movement. If movement is discovered, and all water devices are off, you’ve got a leak! Here are some tips for checking for leaks on various water devices: Toilet:The most common source of leaks in a house is from the toilet. Typically what happens is that the rubber seal inside the tank begins to fail, allowing water to drain from the tank and cause the tank to continuously use water. To check for a toilet leak,
Hot Water Heater:
Sinks & Faucets:
Outside the Home:
Above all, it is important to remember that most people dramatically underestimate the amount of water used by various activities. A ten minute shower, for example, can consume 50 gallons of water or more depending on your faucet. Car washing and lawn watering may increase your water bill by 50% or more depending on frequency. If you suspect that your water usage may be increasing due to water practices, click here [they should be able to click there] to check our conservation tips. |